Super Adhesive is widely used in metal and other materials
Super Adhesive
Nature:
Widely used in metal and other materials, for example: steel, iron, copper, gold, silver, rubber, plastic, glass, ceramic, etc. Thus is a convenient adhesive for fixing and mending glass products, toys, PE products, metal board, electronic accents, stone, shells handicraft, wood handicrafts, bamboo handicrafts, etc.
Direction:
1.Clean the surface of the objects to be glued thoroughly and keep it dry. Make sure the adhering parts bit up well.
2.Drop a little glue onto one part, glued the other part together as soon as possible, and press them together a little while, then the glue will solidify instantly.
Storage:
Under cool and dry circumstance, room temperature between 15-20, use in unless than 8 months storage period..
Technical informat ion:
Color: transparent
Solidification: <=15s, <=20s after storage
Cutting strength: >=10Mpa
Specification:
1.Alumina tube, 2g/ tube, 3g/ tube, 12 tubes/ cardboard
2.Plastic bottle, 2.5g/ bottle, 5g/bottle, 8g/ bottle
3.Big package: 20kg/ plastic pail
Caution:
1.Strong adhesion to skin, dont peel it directly if being glued, bathing within hot water for a while or wipe it off with acetone.
2.Strong smell when volatilize,make sure to use it under wide and air-flowing circumstance when working with it for a long time.
3.Seal the open end tightly to prevent volatilization.
4.Storage under the required condition strictly, high temperature or wetness will shorten the storage period.
Tuesday, September 6, 2011
Not contain styrene and non-toxic Epoxy Resin Injective glue
1.Bicomponent modified epoxy resin injection anchor adhesive
2.Not contain styrene, non-toxic
3.Good thixotropy
1.
Product Characteristics
1) Modified epoxy resin, not contain styrene, safe and non-toxic
2) High strength, strong cohesion, good toughness, effect is equivalent to embedded.
3) Aging resistance, good heat-resistant performance, creep does not occur at room temperature.
4) Low moisture sensitivity, long-term load stability in a damp environment.
5) Acid-alkali resistance, good seismic resistance performance, no expansion.
6) Good thixotropy, especially suitable for anchoring the side or top.
7) Binocular straight mixed package, with special glue gun, not need prepare glue manually.
2.
Application
Range
1) The planting of steel bars and bolts in concrete’s frame member.
2) The fixation of drying hanging brackets of curtain walls and stone materials.
3) The reinforcement of building structures and the anchorage of framework.
4) The basic fixation of many equipments.
5) The anchoring connection of steel structures and concrete structures.
6) The engineering reinforcement of railways, public roads, bridges, water conservancy facilities’ reconstruction and extension, etc.
7) The fixation of advertisement boards, tunnel pipe lines, elevated road noise barriers and barricades.
.
Performance indexes
item
index
Colloidal performance
Splitting tensile strength (MPa)
Bending strength (MPa)
Compressive strength (MPa)
≥8.5
≥50
≥60
Adhesion performance
Steel-steel (steel sleeve) tensile anti-shear strength (MPa)
Under the constraint drawing condition, ribbed steel bars and C30, φ25, L=150mm (MPa)
Adhesion strength of concrete C60, φ25, L=125mm (MPa)
≥16
≥11
≥17
Non-volatile matter content (solid content) (%)
≥99.5
Construction technical indexes
rebar diameter(mmm)
10
12
14
16
18
20
22
25
28
30
drill hole diameter(mm)
14
18
20
22
25
28
30
32
35
37
tension desiger(KN)
depth 10d
19.5
27.7
36.2
50.1
61.5
81.1
98.2
125.2
155.3
190.8
depth 15d
24.2
33.1
46.9
61.8
77.7
96.5
116.8
149.3
187.5
236.1
2.Not contain styrene, non-toxic
3.Good thixotropy
1.
Product Characteristics
1) Modified epoxy resin, not contain styrene, safe and non-toxic
2) High strength, strong cohesion, good toughness, effect is equivalent to embedded.
3) Aging resistance, good heat-resistant performance, creep does not occur at room temperature.
4) Low moisture sensitivity, long-term load stability in a damp environment.
5) Acid-alkali resistance, good seismic resistance performance, no expansion.
6) Good thixotropy, especially suitable for anchoring the side or top.
7) Binocular straight mixed package, with special glue gun, not need prepare glue manually.
2.
Application
Range
1) The planting of steel bars and bolts in concrete’s frame member.
2) The fixation of drying hanging brackets of curtain walls and stone materials.
3) The reinforcement of building structures and the anchorage of framework.
4) The basic fixation of many equipments.
5) The anchoring connection of steel structures and concrete structures.
6) The engineering reinforcement of railways, public roads, bridges, water conservancy facilities’ reconstruction and extension, etc.
7) The fixation of advertisement boards, tunnel pipe lines, elevated road noise barriers and barricades.
.
Performance indexes
item
index
Colloidal performance
Splitting tensile strength (MPa)
Bending strength (MPa)
Compressive strength (MPa)
≥8.5
≥50
≥60
Adhesion performance
Steel-steel (steel sleeve) tensile anti-shear strength (MPa)
Under the constraint drawing condition, ribbed steel bars and C30, φ25, L=150mm (MPa)
Adhesion strength of concrete C60, φ25, L=125mm (MPa)
≥16
≥11
≥17
Non-volatile matter content (solid content) (%)
≥99.5
Construction technical indexes
rebar diameter(mmm)
10
12
14
16
18
20
22
25
28
30
drill hole diameter(mm)
14
18
20
22
25
28
30
32
35
37
tension desiger(KN)
depth 10d
19.5
27.7
36.2
50.1
61.5
81.1
98.2
125.2
155.3
190.8
depth 15d
24.2
33.1
46.9
61.8
77.7
96.5
116.8
149.3
187.5
236.1
Melamine powder 99.8%
Melamine powder 99.8%
1 .Commodity : Melamine
2 .Origin : China
3 .Specifications : Based on GB/T9567-1997
Purify 99.8% min
Moisture Content 0.1% max
PH Value: 7.5-9.5
Ash Content: 0.03% max
Chrome, Hazen 20 max
Turbility(China-Clay) 20 max
4.Packing : In 25kgs bag
5.Marking : Neutral English Marking
6. Quantity: 22 mt/ 20ft container
8. Lead time: within 2 weeeks after payment or L/C
9. Payment terms: 100% L/C at sight or T/T.
1 .Commodity : Melamine
2 .Origin : China
3 .Specifications : Based on GB/T9567-1997
Purify 99.8% min
Moisture Content 0.1% max
PH Value: 7.5-9.5
Ash Content: 0.03% max
Chrome, Hazen 20 max
Turbility(China-Clay) 20 max
4.Packing : In 25kgs bag
5.Marking : Neutral English Marking
6. Quantity: 22 mt/ 20ft container
8. Lead time: within 2 weeeks after payment or L/C
9. Payment terms: 100% L/C at sight or T/T.
anti-hot contact adhesive
Our contact glue is very suitable for handling post figuration work ..
Our contact glue
APPLICATIONS
1. very perfect for fireproof board , main applies in he pretreatment steel board, density board, flakeboard, synthetic resin board when needing bending forming and bonding the surfaces.
2. Demand higher heat-resistance situation such as automotive, electronics industry.
CHARACTERISTICS:
1. good heat resistance ;high initial &late bonding strength ; high bonding strength.
2. be fit for spraying coating use on large area ,especially when handling post figuration work.
PARAMETERS
Main component
Chloroprene , modified resin
Appearance
Buff, viscosity solution
Main solvents
Toluene, petrolum
Viscosity CPS /25
About 150-500
Non-volatile
matter content %
About 20± 1.5
Softening point
150(1day)
Surface drying time
1-2minutes /25
Stickiness
5~20minutes /25
keeping life
12months
Our contact glue
APPLICATIONS
1. very perfect for fireproof board , main applies in he pretreatment steel board, density board, flakeboard, synthetic resin board when needing bending forming and bonding the surfaces.
2. Demand higher heat-resistance situation such as automotive, electronics industry.
CHARACTERISTICS:
1. good heat resistance ;high initial &late bonding strength ; high bonding strength.
2. be fit for spraying coating use on large area ,especially when handling post figuration work.
PARAMETERS
Main component
Chloroprene , modified resin
Appearance
Buff, viscosity solution
Main solvents
Toluene, petrolum
Viscosity CPS /25
About 150-500
Non-volatile
matter content %
About 20± 1.5
Softening point
150(1day)
Surface drying time
1-2minutes /25
Stickiness
5~20minutes /25
keeping life
12months
EVA Sealing Hot Melt Adhesive for manual box
Sealing Hot Melt Adhesive
1. It can be applied in low temp
2. Speed curing time
3. Improve output
4. Widely used
Sealing Hot Melt Adhesive
Descriptio
1. Hot Melt Adhesive stick
2. Application: Packaging, Beverage, Food, DIY/handicraft
3. It can be applied in low temp
Glue Stick Series Applications
Decorations, Toys/Handcrafts, Impact-absorbing materials, All kinds of packaging
Woodenware assembly, General assembly, DIY, Electronics industry UL-94V0.
SPECIFICATION
Product Code
Property Description
Industry Category
801K
Yellow glue stick with high viscosity for manual box sealing; It can be applied to coated paper and general glazed paper box sealing
PE, PP Film Coating Carton/Box Sealing
802B
Assembly, suitable for bonding Nylon cloth, PET cloth, PR film, PP film, and foam, etc .
DIY, Family, Assembly
805
Translucent white glue stick and granule for shoe industry, shoe parts bonding; also for general bonding, impact absorbing material, handcrafts, decorations, toys, ceramics, color boxes, etc.
DIY, Family, Assembly, Shoe Making
805AT
Translucent and white glue stick, granule which can be applied in low temperature for hair decorations, handcrafts, toys, ceramics, impact absorbing material and assembly
Assembly
805J
Good Adhesion to plastic, ceramic, metal, wood, and other materials; can be applied to EPE buffer Materials
Assembly
805WT
Glue stick for general purpose, good transparency. Good adhesion to plastic, ceramic, metal, wood, and other materials
Assembly
806A
Glue stick with high strength. Good adhesion to plastic, ceramic, wood, and other materials
Assembly
808B
Glue stick for general purpose, good transparency. Good adhesion to plastic, ceramic, wood, and other materials
DIY, Famil y, Assembly
810F
Standard type of box sealing adhesive, for general corrugated box packaging
Carton, box Sealing
812A
Glue stick for general purpose, good transparency. Good adhesion to plastic, ceramic, metal, wood, and other materials
Assembly
821A
Glue stick for general purpose, good transparency. Good adhesion to plastic, ceramic, metal, wood, and other materials
Assembly
863H1
Electronic industry, UL 94V-0 grade retardant glue stick
Electronics & Electrical Machinery
812K
glue stick for PP/PE bonding
Assembly, Car Industry
814W
Good bonding strength and heat resistance; contains halogen flame retardant; lower cost
Electronics & Electrical Machinery
818A
UL approved and comply with UL940V0 standard and RoHS regulations, mainly for fixing electric parts.
Electronics & Electrical Machinery
1. It can be applied in low temp
2. Speed curing time
3. Improve output
4. Widely used
Sealing Hot Melt Adhesive
Descriptio
1. Hot Melt Adhesive stick
2. Application: Packaging, Beverage, Food, DIY/handicraft
3. It can be applied in low temp
Glue Stick Series Applications
Decorations, Toys/Handcrafts, Impact-absorbing materials, All kinds of packaging
Woodenware assembly, General assembly, DIY, Electronics industry UL-94V0.
SPECIFICATION
Product Code
Property Description
Industry Category
801K
Yellow glue stick with high viscosity for manual box sealing; It can be applied to coated paper and general glazed paper box sealing
PE, PP Film Coating Carton/Box Sealing
802B
Assembly, suitable for bonding Nylon cloth, PET cloth, PR film, PP film, and foam, etc .
DIY, Family, Assembly
805
Translucent white glue stick and granule for shoe industry, shoe parts bonding; also for general bonding, impact absorbing material, handcrafts, decorations, toys, ceramics, color boxes, etc.
DIY, Family, Assembly, Shoe Making
805AT
Translucent and white glue stick, granule which can be applied in low temperature for hair decorations, handcrafts, toys, ceramics, impact absorbing material and assembly
Assembly
805J
Good Adhesion to plastic, ceramic, metal, wood, and other materials; can be applied to EPE buffer Materials
Assembly
805WT
Glue stick for general purpose, good transparency. Good adhesion to plastic, ceramic, metal, wood, and other materials
Assembly
806A
Glue stick with high strength. Good adhesion to plastic, ceramic, wood, and other materials
Assembly
808B
Glue stick for general purpose, good transparency. Good adhesion to plastic, ceramic, wood, and other materials
DIY, Famil y, Assembly
810F
Standard type of box sealing adhesive, for general corrugated box packaging
Carton, box Sealing
812A
Glue stick for general purpose, good transparency. Good adhesion to plastic, ceramic, metal, wood, and other materials
Assembly
821A
Glue stick for general purpose, good transparency. Good adhesion to plastic, ceramic, metal, wood, and other materials
Assembly
863H1
Electronic industry, UL 94V-0 grade retardant glue stick
Electronics & Electrical Machinery
812K
glue stick for PP/PE bonding
Assembly, Car Industry
814W
Good bonding strength and heat resistance; contains halogen flame retardant; lower cost
Electronics & Electrical Machinery
818A
UL approved and comply with UL940V0 standard and RoHS regulations, mainly for fixing electric parts.
Electronics & Electrical Machinery
acetoxy silicone sealant
1 acetoxy silicone sealant
2 high strength
3.quick dry
4 good weather proof
5.Excellent adhesive ability
we are a professional silicone sealant manufacturer
Characteristics of product:
1. JS-607 acetoxy silicone glass sealant is clear rtv silicone sealant ,colored silicone sealant ,quick dry ,single component, acetic acid type It easily solidified at room temperature and convenient to use and has solidification rate.
2. Good weatger-agin resistance.
3. Good cementation ability for various building materials.
Major application:
1.Installtion of diversified doors and windows.
2. Cementation and sealing for glass decoration indoor.
3. Suitable for professional persons to use for general joint filling and sealing.
Standard:
GB/T 14683-2003
Prosper silicone sealant inclu de the following items
1 acid silicone sealant
2 neutral silicone sealant
3 silicone stone sealant
4 aquarium special silicone glass sealant
5 Large plate glass special silicone sealant
6 Structural silicone sealant
2 high strength
3.quick dry
4 good weather proof
5.Excellent adhesive ability
we are a professional silicone sealant manufacturer
Characteristics of product:
1. JS-607 acetoxy silicone glass sealant is clear rtv silicone sealant ,colored silicone sealant ,quick dry ,single component, acetic acid type It easily solidified at room temperature and convenient to use and has solidification rate.
2. Good weatger-agin resistance.
3. Good cementation ability for various building materials.
Major application:
1.Installtion of diversified doors and windows.
2. Cementation and sealing for glass decoration indoor.
3. Suitable for professional persons to use for general joint filling and sealing.
Standard:
GB/T 14683-2003
Prosper silicone sealant inclu de the following items
1 acid silicone sealant
2 neutral silicone sealant
3 silicone stone sealant
4 aquarium special silicone glass sealant
5 Large plate glass special silicone sealant
6 Structural silicone sealant
two components polysulfide sealant
1.5.5per plastic bucket
2.Reasonable curing rate;
3.High strength;
4.Long shelf life;
CY208 two-component structural silicone sealant
Features:
1.CY208 two-component silicone sealant specifically designed for the structural assembly in the high modulus, neutral, high-performance fixed construction sealant, it has excellent resistance to ozone, UV radiation release, resistance to extreme temperatures ( -40 ~ 150 °C) to most building materials have good adhesive properties.
2. For most glass and coated glass has excellent adhesive nodal.
3. Neutral fixed, non-corrosive to most buildings.
4. Fixed after the formation of silicone rubber body, with excellent weather resistance and aging.
5.A component and B component / curing agent supporting batch no restrictions.
6. Conservation period is short and mech anical sizing, is conducive to the construction process.
Basic purposes:
CY208 silicone sealant designed in structural applications:
1, the structure of the glass curtain wall.
2, glass and metal bonding between the materials.
3, and other construction and industrial adhesive seal.
Instructions for use:
1, prior to use adhesive material compatibility testing, to be constructed after the confirmation of qualified products.
2, silicone sealant curing agent stir before use to avoid the first place that may arise during the deposition phenomenon. As curing agent and exposure to moisture in the atmosphere would have reflected, not prolonged exposure to air.
3, CY208 mixture of silicone sealant base and curing agent weight ratio of 12.5:1 (volume ratio 9.5:1) Users can change the total mixing ratio of 10:1 ~ 16:1 (volume ratio 7: 1 ~ 11:1) regulating coagulation time. Within this context, a mixture of sealant, its original character will not cha nge significantly.
4, in high temperature environment, the substrate surface temperature exceeds 40 °C, not construction.
Restrictions on Use:
1, does not apply to all the leaking oil, plasticizers, solvents, or frost, wet surface.
2, the test and all building materials have good adhesion and compatibility.
3, not for long-term flooding or damp places throughout the year.
4, B-component with the air react with water vapor, not long-term exposure to air.
Standard:
GB16776-2005 standard
Typical technical parameters:
The following data are for reference only, not recommended norm
Item Specification
1 sag sag placed mm 3
The same type of horizontal
2 out of s 10
Application of the Min 20 3
4, dry time, min (temperature 25 °C, relative humidity 50%) 30 ~ 60
5 Shaw temperature 30 ~ 60
6 Tensile properties of tensile bond strength adhesive standard conditions 0.6 mpa
90 °C 0.45
-30 °C0 .45
0.45 after flooding
Water - UV light after 0.45
5% bond failure area
23 °C, the maximum tensile strength of 100% elongation
TGA 7 thermal aging10
No cracking
Powder free
Safety:
1, no fixed structure, the structure of plastic and will be fixed during the release of volatile compounds, long-term inhalation of high concentrations of volatile compounds detrimental to health, therefore, should pay attention to maintain good workplace ventilation.
2, the structure is not fixed for too long direct contact with skin glue, if accidentally into eyes, rinse immediately with plenty of water, if necessary, and then ask the doctor to check.
3, the structural adhesive will not be fixed after the release of hazardous substances, nor will the role of skin damage.
4, such as the swallow, adhesive, should immediately seek medical attention.
Color and Packaging:
CY208 A component structural silicone sealant / base mixture of whit e paste, the use of standard 190L iron drum; B component / curing agent for the easy flow of black liquid, the use of 20L standard iron or plastic drum.
Storage period:
Please store in the temperature cool and dry place below 27 °C, the effective period of 12 months.
2.Reasonable curing rate;
3.High strength;
4.Long shelf life;
CY208 two-component structural silicone sealant
Features:
1.CY208 two-component silicone sealant specifically designed for the structural assembly in the high modulus, neutral, high-performance fixed construction sealant, it has excellent resistance to ozone, UV radiation release, resistance to extreme temperatures ( -40 ~ 150 °C) to most building materials have good adhesive properties.
2. For most glass and coated glass has excellent adhesive nodal.
3. Neutral fixed, non-corrosive to most buildings.
4. Fixed after the formation of silicone rubber body, with excellent weather resistance and aging.
5.A component and B component / curing agent supporting batch no restrictions.
6. Conservation period is short and mech anical sizing, is conducive to the construction process.
Basic purposes:
CY208 silicone sealant designed in structural applications:
1, the structure of the glass curtain wall.
2, glass and metal bonding between the materials.
3, and other construction and industrial adhesive seal.
Instructions for use:
1, prior to use adhesive material compatibility testing, to be constructed after the confirmation of qualified products.
2, silicone sealant curing agent stir before use to avoid the first place that may arise during the deposition phenomenon. As curing agent and exposure to moisture in the atmosphere would have reflected, not prolonged exposure to air.
3, CY208 mixture of silicone sealant base and curing agent weight ratio of 12.5:1 (volume ratio 9.5:1) Users can change the total mixing ratio of 10:1 ~ 16:1 (volume ratio 7: 1 ~ 11:1) regulating coagulation time. Within this context, a mixture of sealant, its original character will not cha nge significantly.
4, in high temperature environment, the substrate surface temperature exceeds 40 °C, not construction.
Restrictions on Use:
1, does not apply to all the leaking oil, plasticizers, solvents, or frost, wet surface.
2, the test and all building materials have good adhesion and compatibility.
3, not for long-term flooding or damp places throughout the year.
4, B-component with the air react with water vapor, not long-term exposure to air.
Standard:
GB16776-2005 standard
Typical technical parameters:
The following data are for reference only, not recommended norm
Item Specification
1 sag sag placed mm 3
The same type of horizontal
2 out of s 10
Application of the Min 20 3
4, dry time, min (temperature 25 °C, relative humidity 50%) 30 ~ 60
5 Shaw temperature 30 ~ 60
6 Tensile properties of tensile bond strength adhesive standard conditions 0.6 mpa
90 °C 0.45
-30 °C0 .45
0.45 after flooding
Water - UV light after 0.45
5% bond failure area
23 °C, the maximum tensile strength of 100% elongation
TGA 7 thermal aging10
No cracking
Powder free
Safety:
1, no fixed structure, the structure of plastic and will be fixed during the release of volatile compounds, long-term inhalation of high concentrations of volatile compounds detrimental to health, therefore, should pay attention to maintain good workplace ventilation.
2, the structure is not fixed for too long direct contact with skin glue, if accidentally into eyes, rinse immediately with plenty of water, if necessary, and then ask the doctor to check.
3, the structural adhesive will not be fixed after the release of hazardous substances, nor will the role of skin damage.
4, such as the swallow, adhesive, should immediately seek medical attention.
Color and Packaging:
CY208 A component structural silicone sealant / base mixture of whit e paste, the use of standard 190L iron drum; B component / curing agent for the easy flow of black liquid, the use of 20L standard iron or plastic drum.
Storage period:
Please store in the temperature cool and dry place below 27 °C, the effective period of 12 months.
mastic glue for marble and granite
MARBLE ADHESIVE
BONDING,FILLING,SETTING,FIXING,REAPAIING
FOR THE STONE & WOOD
TRANSPARANT,BEIGE,WHITE.
MARBLE ADHESIVE
1) BINDING,MENDING,SETTING OF ALL KINDS OF STONES;
2)REPAIRING THE SEEMS AND DENTS OF THE SURFACE OF STONE;
3)HIGH INTENSITY ,FAST CURING TIME AND STABLE OF STORAGE.
BONDING,FILLING,SETTING,FIXING,REAPAIING
FOR THE STONE & WOOD
TRANSPARANT,BEIGE,WHITE.
MARBLE ADHESIVE
1) BINDING,MENDING,SETTING OF ALL KINDS OF STONES;
2)REPAIRING THE SEEMS AND DENTS OF THE SURFACE OF STONE;
3)HIGH INTENSITY ,FAST CURING TIME AND STABLE OF STORAGE.
SHMP 68%
1,shmp manufacturer
2,more than 20 years
3,free sample
4,shmp sodium hexametaphosphate
5,good quality
SHMP(sodium hexametaphosphate)
1,Properties:
1) White powder; Density 2.484(20);
2) soluble in water but insoluble in organic solvent;
3) It has got strong hygroscopicity and can absorb humidity from the air to become into pasty form; 4) It may form soluble chelates with ions of Ca, Ba, Mg, Cu, Fe ect.
2,Application:
1) shmp Used in industries of oil field, paper production, textile, dyeing, petroleum, chemistry, metallurgy and construction materials etc.
2) as water softener, flotation selecting agent, disperser and high temperature adhesive:
3) In food industry,shmp used as an additive, nourishing agent, quality improver, PH regulator, metal ions chelating agent, adhesive and leavening agent etc
3,Specification:
Indexes
Industry Grade
Total phosphates(as P2O5)% ≥
68.0
Inactive Phosphates(as P2O5)% ≤
7.5
Iron (Fe)% ≤
0.05
PH Value
5.8-7.3
Heavy Metals(as Pb)% ≤
Arsenic (As)% ≤
Fluoride(as F)% ≤
Water Insoluble matter%≤
0.05
DP
9-21
Mesh Number
60 ~ 80
2,more than 20 years
3,free sample
4,shmp sodium hexametaphosphate
5,good quality
SHMP(sodium hexametaphosphate)
1,Properties:
1) White powder; Density 2.484(20);
2) soluble in water but insoluble in organic solvent;
3) It has got strong hygroscopicity and can absorb humidity from the air to become into pasty form; 4) It may form soluble chelates with ions of Ca, Ba, Mg, Cu, Fe ect.
2,Application:
1) shmp Used in industries of oil field, paper production, textile, dyeing, petroleum, chemistry, metallurgy and construction materials etc.
2) as water softener, flotation selecting agent, disperser and high temperature adhesive:
3) In food industry,shmp used as an additive, nourishing agent, quality improver, PH regulator, metal ions chelating agent, adhesive and leavening agent etc
3,Specification:
Indexes
Industry Grade
Total phosphates(as P2O5)% ≥
68.0
Inactive Phosphates(as P2O5)% ≤
7.5
Iron (Fe)% ≤
0.05
PH Value
5.8-7.3
Heavy Metals(as Pb)% ≤
Arsenic (As)% ≤
Fluoride(as F)% ≤
Water Insoluble matter%≤
0.05
DP
9-21
Mesh Number
60 ~ 80
hot melt adhesive powder
a.Item:hot melt adhesive powder
b.Material:TPU
c.Usage:flocking/interlining etc
d.Feature:low temp
e.Mob:8618939758527
·TPU hot melt adhesive powder
Type:U1101P
Component: TPU
Particle size: 0-80um/80-170um/80-200um/150-250um
Feture: high elasticity,strong adhesive forcehigh bond intensity;good resistance to dry cleaning and 40 laundrying.The product has passed SGS environmental supervision and excludes toluene.It is non-toxic and environmentally friendly.
Substrates: elastic materials,waterproof fabrics,various kinds of fabrics,metals,electronic materials,special bond effects in PVC plastics and other materials.
Application field:widly used in heat transfer printing,flocking,interlining,filter industry,automotive upholstery and other fields.
·Operating data sheet
Type
Melt Range
()
Bonding condition
Resistance to
Temp()
Press barkg/cm2
Time(s)
Water
Dry
U1101p
95-115
135-150
0.5-1.5
10-15
40
Good
Good
b.Material:TPU
c.Usage:flocking/interlining etc
d.Feature:low temp
e.Mob:8618939758527
·TPU hot melt adhesive powder
Type:U1101P
Component: TPU
Particle size: 0-80um/80-170um/80-200um/150-250um
Feture: high elasticity,strong adhesive forcehigh bond intensity;good resistance to dry cleaning and 40 laundrying.The product has passed SGS environmental supervision and excludes toluene.It is non-toxic and environmentally friendly.
Substrates: elastic materials,waterproof fabrics,various kinds of fabrics,metals,electronic materials,special bond effects in PVC plastics and other materials.
Application field:widly used in heat transfer printing,flocking,interlining,filter industry,automotive upholstery and other fields.
·Operating data sheet
Type
Melt Range
()
Bonding condition
Resistance to
Temp()
Press barkg/cm2
Time(s)
Water
Dry
U1101p
95-115
135-150
0.5-1.5
10-15
40
Good
Good
Sunday, September 4, 2011
Competitive offering APS 1012 epoxy resin gem glue
1. low viscosity
2. excellent hardness
3. excellent hardness
4. compressive resistance
5. wear-resistance and strength
Competitive offering APS 1012 epoxy resin gem glue
Features
1. This product is epoxy resin gem glue, with low viscosity, excellent permeability and transparency. It is easy to use.
2. Need heating for curing, and it can be used for a long time.
3. After cured, it is with excellent hardness and surface brightness.
4. Excellent acid and alkali resistance, hot and humid resistance, compressive resistance, scraping-resistance, wear-resistance and strength.
Application
1. Pressure infusion of all kinds of turquoise and jaspery, and it can be processed into turquoise semi-finished products.
2. Pouring of all kinds of artificial gems.
Properties
Type
1012A
1012B
Color
Transparent liquid
Transparent liquid
Ratio 25
°C
1.07g/cm
0.93g/cm
Viscosity 25
°C
500~580cps
25~35cps
Properties after cured
Properties
Unit
Value
Compressive strength
Kg/mm
25
Hardness
Shore D
≥96
Thermal deformation temperature
°C
165
Usage
Weight Ratio: A : B=100 : 100
Up Time: 25°C × 15-20 days
Cured condition: 100°C × 48-72 hours
1. The product to be poured should be removed tide and kept dry.
2. According to the ratio, after mix Part A and Part B, it should be stirred fully.
3. The glue should be used promptly after mixed. You can add a few diluents into the glue. After poured, the glue will infiltrate into the turquoise cavities under the pressure.
4. Please keep the environments cleaning.
Note
1. Please wear the protective gloves when you want to use the glue. If there is some bonding to your skin, please wipe with acetone and alcohol, then clean with cleaner.
2. Please try with a few, and grasp the using technology.
Storage
Put the product in a ventilated, cool and dry place. The expiration time is six months.
Package
40kg: A: 20kg/barrel; B: 20kg/barrel
2. excellent hardness
3. excellent hardness
4. compressive resistance
5. wear-resistance and strength
Competitive offering APS 1012 epoxy resin gem glue
Features
1. This product is epoxy resin gem glue, with low viscosity, excellent permeability and transparency. It is easy to use.
2. Need heating for curing, and it can be used for a long time.
3. After cured, it is with excellent hardness and surface brightness.
4. Excellent acid and alkali resistance, hot and humid resistance, compressive resistance, scraping-resistance, wear-resistance and strength.
Application
1. Pressure infusion of all kinds of turquoise and jaspery, and it can be processed into turquoise semi-finished products.
2. Pouring of all kinds of artificial gems.
Properties
Type
1012A
1012B
Color
Transparent liquid
Transparent liquid
Ratio 25
°C
1.07g/cm
0.93g/cm
Viscosity 25
°C
500~580cps
25~35cps
Properties after cured
Properties
Unit
Value
Compressive strength
Kg/mm
25
Hardness
Shore D
≥96
Thermal deformation temperature
°C
165
Usage
Weight Ratio: A : B=100 : 100
Up Time: 25°C × 15-20 days
Cured condition: 100°C × 48-72 hours
1. The product to be poured should be removed tide and kept dry.
2. According to the ratio, after mix Part A and Part B, it should be stirred fully.
3. The glue should be used promptly after mixed. You can add a few diluents into the glue. After poured, the glue will infiltrate into the turquoise cavities under the pressure.
4. Please keep the environments cleaning.
Note
1. Please wear the protective gloves when you want to use the glue. If there is some bonding to your skin, please wipe with acetone and alcohol, then clean with cleaner.
2. Please try with a few, and grasp the using technology.
Storage
Put the product in a ventilated, cool and dry place. The expiration time is six months.
Package
40kg: A: 20kg/barrel; B: 20kg/barrel
Woodworking Hot melt Adhesive For Woodworking /edge banding
Woodworking Hot melt Adhesive For edge banding
1. Wood working profile wrapping adhesive
2. filler-free adhesive.
Woodworking Hot melt Adhesive For Wooden Furniture/edge banding
Wood working profile wrapping adhesive, filler-free adhesive.
Industry Category:
Woodworking / Construction Material
High/medium/low temperature (Edge Banding HMA Series) can be applied to automatic linear edge bonding machine/semi-automatic edge bonding machine, manual edge bonding machine.
Excellent adhesion to PVC, ABS, solid wood, wood veneer lumber, PP for edge banding fiberboard, particleboard, plywood, block board, edge banding for fireproofing board.
EVA/APAO/TPR (Profile wrapping HMA Series) can be applied to PVC film, paper materials, wood materials, OPP film to fiberboard, solid wood, ACP, profile wrapping and surface adhes ion for fireproofing boards, can also be applied to adjust viscosity by adding filler in it.
Product Code
Property Description
Industry
Category
717C
Wood working profile wrapping adhesive, filler-free adhesive.
Woodworking / Construction Material
717C
Wood working glue, agent-filling-free tackiness enhancing glue.
Woodworking / Construction Material
722A
Suitable for Automatic Edge-Banding Machine
Excellent bonding strength for PVC/ ABS veneer to mid-dense fiberboard, particleboard, and plywood.
Woodworking / Construction Material
722AD
Suitable for Automatic Edge-Banding Machine
Excellent bonding strength for PVC/ ABS veneer to mid-dense fiberboard, particleboard, and plywood.
Woodworking / Construction Material
722B
Suitable for Manual Edge-Banding Machine
Excellent bonding strength for PVC veneer to mid-dense fiberboard, particleboard, and plywood.
Woodworking / Construction Material
722E
Sui table for Manual and Automatic Edge-Banding Machine
Excellent bonding strength for veneers of wooden, PVC, Melamine, ABS to mid-dense fiberboard, particleboard, and plywood.
Woodworking / Construction Material
755A
Suitable for Automatic Edge-Banding Machine
Excellent bonding strength for PVC/ ABS veneer to mid-dense fiberboard, particleboard, and plywood. High viscosity. Good wettability.
Woodworking / Construction Material
755B
Suitable for Manual Edge-Banding Machine
Excellent bonding strength for veneers of wooden, PVC, Melamine, ABS to mid-dense fiberboard, particleboard, and plywood.
Woodworking / Construction Material
797C
Increase cohesion for profile wrapping, low temperature edge banding, agent-filling-free tackiness enhancing glue.
Woodworking / Construction Material
797C
Increase cohesion for profile wrapping, low temperature edge banding, agent-filling-free tackiness enhancing glue.
Woodworking / Construction Mat erial
797E
Great adhesion to wood material, PVC, ABS, etc. High viscosity that can applied to woodworking, edge banding, and profile wrapping. It is yellow transparent, can be used on plates with very color. None filler type of adhesive.
Assembly,Woodworking / Construction Material
798B
Suitable for Manual Edge-Banding Machine
Excellent bonding strength for veneers of PVC, Melamine, ABS to mid-dense fiberboard, particleboard, and plywood.
Woodworking / Construction Material
798HA
Suitable for Manual Edge-Banding Machine
Excellent bonding strength for veneers of PVC, Melamine, ABS to mid-dense fiberboard, particleboard, and plywood.
Woodworking / Construction Material
799D
Suitable for Manual and Automatic Edge-Banding Machine
Excellent bonding strength for PVC/ ABS veneer to mid-dense fiberboard, particleboard, and plywood.
Woodworking / Construction Material
799K
Suitable for Automatic Edge-Banding Machine
Excellent bo nding strength for veneers of wood, wood rods, PVC, Melamine, ABS to mid-dense fiberboard, particleboard, and plywood., which is also very good for fingerjoint of wood material
Woodworking / Construction Material
999A
APAO wrapping adhesive, suitable for particleboard, MDF, block board, plywood, and wood plastic composite
Woodworking / Construction Material
1. Wood working profile wrapping adhesive
2. filler-free adhesive.
Woodworking Hot melt Adhesive For Wooden Furniture/edge banding
Wood working profile wrapping adhesive, filler-free adhesive.
Industry Category:
Woodworking / Construction Material
High/medium/low temperature (Edge Banding HMA Series) can be applied to automatic linear edge bonding machine/semi-automatic edge bonding machine, manual edge bonding machine.
Excellent adhesion to PVC, ABS, solid wood, wood veneer lumber, PP for edge banding fiberboard, particleboard, plywood, block board, edge banding for fireproofing board.
EVA/APAO/TPR (Profile wrapping HMA Series) can be applied to PVC film, paper materials, wood materials, OPP film to fiberboard, solid wood, ACP, profile wrapping and surface adhes ion for fireproofing boards, can also be applied to adjust viscosity by adding filler in it.
Product Code
Property Description
Industry
Category
717C
Wood working profile wrapping adhesive, filler-free adhesive.
Woodworking / Construction Material
717C
Wood working glue, agent-filling-free tackiness enhancing glue.
Woodworking / Construction Material
722A
Suitable for Automatic Edge-Banding Machine
Excellent bonding strength for PVC/ ABS veneer to mid-dense fiberboard, particleboard, and plywood.
Woodworking / Construction Material
722AD
Suitable for Automatic Edge-Banding Machine
Excellent bonding strength for PVC/ ABS veneer to mid-dense fiberboard, particleboard, and plywood.
Woodworking / Construction Material
722B
Suitable for Manual Edge-Banding Machine
Excellent bonding strength for PVC veneer to mid-dense fiberboard, particleboard, and plywood.
Woodworking / Construction Material
722E
Sui table for Manual and Automatic Edge-Banding Machine
Excellent bonding strength for veneers of wooden, PVC, Melamine, ABS to mid-dense fiberboard, particleboard, and plywood.
Woodworking / Construction Material
755A
Suitable for Automatic Edge-Banding Machine
Excellent bonding strength for PVC/ ABS veneer to mid-dense fiberboard, particleboard, and plywood. High viscosity. Good wettability.
Woodworking / Construction Material
755B
Suitable for Manual Edge-Banding Machine
Excellent bonding strength for veneers of wooden, PVC, Melamine, ABS to mid-dense fiberboard, particleboard, and plywood.
Woodworking / Construction Material
797C
Increase cohesion for profile wrapping, low temperature edge banding, agent-filling-free tackiness enhancing glue.
Woodworking / Construction Material
797C
Increase cohesion for profile wrapping, low temperature edge banding, agent-filling-free tackiness enhancing glue.
Woodworking / Construction Mat erial
797E
Great adhesion to wood material, PVC, ABS, etc. High viscosity that can applied to woodworking, edge banding, and profile wrapping. It is yellow transparent, can be used on plates with very color. None filler type of adhesive.
Assembly,Woodworking / Construction Material
798B
Suitable for Manual Edge-Banding Machine
Excellent bonding strength for veneers of PVC, Melamine, ABS to mid-dense fiberboard, particleboard, and plywood.
Woodworking / Construction Material
798HA
Suitable for Manual Edge-Banding Machine
Excellent bonding strength for veneers of PVC, Melamine, ABS to mid-dense fiberboard, particleboard, and plywood.
Woodworking / Construction Material
799D
Suitable for Manual and Automatic Edge-Banding Machine
Excellent bonding strength for PVC/ ABS veneer to mid-dense fiberboard, particleboard, and plywood.
Woodworking / Construction Material
799K
Suitable for Automatic Edge-Banding Machine
Excellent bo nding strength for veneers of wood, wood rods, PVC, Melamine, ABS to mid-dense fiberboard, particleboard, and plywood., which is also very good for fingerjoint of wood material
Woodworking / Construction Material
999A
APAO wrapping adhesive, suitable for particleboard, MDF, block board, plywood, and wood plastic composite
Woodworking / Construction Material
EP3321 CCD camera modules/CMOS Epoxy Adhesives
1. shear thinning.
2. excellent moisture strength,high electronic properties.
EP3321 epoxy adhesive is mainly applied to the CCD camera modules/CMOS and sensitive electronic components, etc.
Item
Characteristics
Testing Methods
Appearance
Black liquid
Visual
Viscosity mpas @ 25
°C
50000
ASTM-D-2392
Density@ 25
°C
1.41g/ml
ASTM-D-792
Curing conditions
120
°C
*3
0min
2. excellent moisture strength,high electronic properties.
EP3321 epoxy adhesive is mainly applied to the CCD camera modules/CMOS and sensitive electronic components, etc.
Item
Characteristics
Testing Methods
Appearance
Black liquid
Visual
Viscosity mpas @ 25
°C
50000
ASTM-D-2392
Density@ 25
°C
1.41g/ml
ASTM-D-792
Curing conditions
120
°C
*3
0min
Good hot melt adhesive for pet mat
Typies of hotmelt adhesive glue:
a.construction glue for baby diaper and sanitary
b.position glue for sanitary
c.elastic glue
1)hot melt adhesive for pet mat
2)shape: block
3)Composition: thermoplastic rubber & synthetic resin
4)with SGS certificat
TS-602 is a hot melt adhesive designed not only for positioning application but also for construction application for sanitary napkins and for pet mat. With good heat-stability
and low viscosity, it can be applied smoothly and provide proper and consistent peel to
undergarment. Meanwhile,its transfer-resistance and aging-resistance are also well controlled.
composition Thermoplastic rubber and systhetic resin
Gardener Color Light Yellow
Ring and Ball softening point 75-90ºC
Rolling ball tack > 6#
Holding power (1000 g, 1 inch2, 23ºC) & gt; 36Hr
Brookfield viscosity 125---------12000 Cps
150---------1850 Cps
175---------1200 Cps
200---------440 Cps
Ring and Ball softening point 75-90 ºc
180°peel strength to steel > 18 N/inch
Foreign materials Invisible by naked eyes
Application methods
slot or roller
Recommended application temperature
140~170 ºC
Shelf life:one year
Toxicity:no
Appearance:Block.
a.construction glue for baby diaper and sanitary
b.position glue for sanitary
c.elastic glue
1)hot melt adhesive for pet mat
2)shape: block
3)Composition: thermoplastic rubber & synthetic resin
4)with SGS certificat
TS-602 is a hot melt adhesive designed not only for positioning application but also for construction application for sanitary napkins and for pet mat. With good heat-stability
and low viscosity, it can be applied smoothly and provide proper and consistent peel to
undergarment. Meanwhile,its transfer-resistance and aging-resistance are also well controlled.
composition Thermoplastic rubber and systhetic resin
Gardener Color Light Yellow
Ring and Ball softening point 75-90ºC
Rolling ball tack > 6#
Holding power (1000 g, 1 inch2, 23ºC) & gt; 36Hr
Brookfield viscosity 125---------12000 Cps
150---------1850 Cps
175---------1200 Cps
200---------440 Cps
Ring and Ball softening point 75-90 ºc
180°peel strength to steel > 18 N/inch
Foreign materials Invisible by naked eyes
Application methods
slot or roller
Recommended application temperature
140~170 ºC
Shelf life:one year
Toxicity:no
Appearance:Block.
spray adhesive for mattress and pillows
spray adhesive for mattress,
soft eadge,powerful,high solids ,
light smell,
economical,
spray adhesive for mattress and pillows 680B#
Main ingredients:SBS,resin,rosin,solvent oil No.6,antioxidant
Viscosity(MPA'S):100±30
Solid content(%):30±5
Maximum spray area:20 SQM/Kg
Heat resistance:60centigrade/140F
Flexibility(Mpa):over 1.6
Color:clear yellowish or per your request
State:liquid
Feature:powerful,aging-resistant,high solids,no smell after hardening
For the field:pillow and mattress
For the materials:sponge,foam,cloth etc, used for pillow and mattress
Package:14kg or 15kg G.W per tin
Operation note:1-5 minutes air time before bond after double side sprayed on. All-around pressure is important. Non-uniformly spray or sufficient pressure will lead to cracking.
soft eadge,powerful,high solids ,
light smell,
economical,
spray adhesive for mattress and pillows 680B#
Main ingredients:SBS,resin,rosin,solvent oil No.6,antioxidant
Viscosity(MPA'S):100±30
Solid content(%):30±5
Maximum spray area:20 SQM/Kg
Heat resistance:60centigrade/140F
Flexibility(Mpa):over 1.6
Color:clear yellowish or per your request
State:liquid
Feature:powerful,aging-resistant,high solids,no smell after hardening
For the field:pillow and mattress
For the materials:sponge,foam,cloth etc, used for pillow and mattress
Package:14kg or 15kg G.W per tin
Operation note:1-5 minutes air time before bond after double side sprayed on. All-around pressure is important. Non-uniformly spray or sufficient pressure will lead to cracking.
New Zhongrun 528 Acid glass silicone sealant
Professional manufacture .High quality and good price. The silicon sealant has passed ISO9001 international system certification
1.Features:
New Zhongrun 528 Acid glass silicone sealant is the single component, acetic type, room temperature curing, high-quality silicone sealant, easy to use, fast curing, has excellent resistance to weather, with good adhesive properties to a variety of building materials. Widely used in glass, aluminum, ceramic, glass fiber, non-oily wood and glass doors and windows and other works of the bonding and sealing, can not be used as a structural sealant.
2.Safety Tips
Contact with uncured sealant directly will stimulate the skin and eyes, excessive exposure to the gas distribution curing environment will stimulate the eyes, nose and throat. Avoid contact with skin. Used in a well ventilated area.,and use the appropriate gloves.
3.Implementation of standards
GB/T14683-2003
4.Storage period
Should be stored in a cool dry place, storage temperature is below 27 °C, storage period of 9 months.
5.Technical Specifications
Droop degrees (mm)
Extrusive characteristic
(ml/min)
Tack-free Time (min)
Shore hardness (A)
100% Tensile modulus
(Mpa)
23°C
-20°C
Tensile-
strength
(Mpa)
Elongation at break %
0
326
7
21
0.34
0.46
0.79
380
The company is only responsible for the product quality conform to the above standard, regarding surpasses the consequence which outside the product standard creates, this company is generally irresponsible.
1.Features:
New Zhongrun 528 Acid glass silicone sealant is the single component, acetic type, room temperature curing, high-quality silicone sealant, easy to use, fast curing, has excellent resistance to weather, with good adhesive properties to a variety of building materials. Widely used in glass, aluminum, ceramic, glass fiber, non-oily wood and glass doors and windows and other works of the bonding and sealing, can not be used as a structural sealant.
2.Safety Tips
Contact with uncured sealant directly will stimulate the skin and eyes, excessive exposure to the gas distribution curing environment will stimulate the eyes, nose and throat. Avoid contact with skin. Used in a well ventilated area.,and use the appropriate gloves.
3.Implementation of standards
GB/T14683-2003
4.Storage period
Should be stored in a cool dry place, storage temperature is below 27 °C, storage period of 9 months.
5.Technical Specifications
Droop degrees (mm)
Extrusive characteristic
(ml/min)
Tack-free Time (min)
Shore hardness (A)
100% Tensile modulus
(Mpa)
23°C
-20°C
Tensile-
strength
(Mpa)
Elongation at break %
0
326
7
21
0.34
0.46
0.79
380
The company is only responsible for the product quality conform to the above standard, regarding surpasses the consequence which outside the product standard creates, this company is generally irresponsible.
Match Gelatin
match gelatin is mainly used in photographic paper, fixature and galvanoplastics liquid, match and wooden furniture.
Match Gelatin is light yellow or brown grain, which can pass the 4mm aperture standard sieve. It is mainly used in photographic paper, fixature and galvanoplastics liquid, match and wooden furniture. The product is under the QB/T1995-94 national trade standard. We can handle the SGS, ITS quality certificate and CIQ veterinary sanitation certificate and the note for changing the certificate of letting pass.
Match Gelatin is light yellow or brown grain, which can pass the 4mm aperture standard sieve. It is mainly used in photographic paper, fixature and galvanoplastics liquid, match and wooden furniture. The product is under the QB/T1995-94 national trade standard. We can handle the SGS, ITS quality certificate and CIQ veterinary sanitation certificate and the note for changing the certificate of letting pass.
34 Not contain styrene and non-toxic granite adhesive
1)Good bonding and strongly permeate
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barr el)
30kg/group(A~20kg. B~10kg)
2)Non-volatile
3)Anti-aging and waterproof
4)Good toughness ,shock resistance
YC186 seam sealer is a kind of A, B groups modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, ratio of liberal application for a long period use, serous perfusion technique
This product is widely used for repairing fissure in water conservancy, pavement concrete bridge, houses and other engineering, and repairing concrete ,if it cracks or loose,,FRP and structure surface anti-corrosive
.
Composition
A,B groups
proportion
A~B=2~1
Viscosity (cp,25c)
80
Density (g/cm3,25c)
1.0
Compressive (MPa)
51 (GB/T2569)
Flexural (MPa)
35 (GB/T2570)
Tensile (MPa)
23 (GB/T2568)
Note
Slight irritation to the skin
Package (barr el)
30kg/group(A~20kg. B~10kg)
587 Silicone sealants
1.RTV,flexible,elongate and excellent oil resistance,blue.
2.Gaps fill up to 6mm.
3.Temperature range(*c)-50~210
587 Silicone flange sealant:
RTV,flexible,elongate and excellent oil resistance,blue.
Gaps fill up to 6mm.
Technical Date Sheet
Product Number
Container
Color
Extrusion rants(g/min)
Tack free(min)
Gap fill(mm)
Elongation(%)
Tensile shear strength(N/mm²)
Temperature range(°C)
207
300ml
White/Clear
≥100
30
6
≥300
1.5
-50~210
587
300ml
Blue
≥125
20
6
≥310
1.7
-50~210
593
300ml
Black
≥100
30
6
≥300
2.0
-50~200
595
300ml
Clear
≥100
30
6
≥300
2.7
-50~200
596
300ml
Red
≥250
30
6
≥130
2.7
-50~320
598
300m l
Black
≥220
30
6
≥300
2.7
-50~210
5699
300ml
Grey
≥200
30
6
≥100
1.5
-50~210
5900
300ml
Black
≥200
30
6
≥550
1.3
-54~250
2.Gaps fill up to 6mm.
3.Temperature range(*c)-50~210
587 Silicone flange sealant:
RTV,flexible,elongate and excellent oil resistance,blue.
Gaps fill up to 6mm.
Technical Date Sheet
Product Number
Container
Color
Extrusion rants(g/min)
Tack free(min)
Gap fill(mm)
Elongation(%)
Tensile shear strength(N/mm²)
Temperature range(°C)
207
300ml
White/Clear
≥100
30
6
≥300
1.5
-50~210
587
300ml
Blue
≥125
20
6
≥310
1.7
-50~210
593
300ml
Black
≥100
30
6
≥300
2.0
-50~200
595
300ml
Clear
≥100
30
6
≥300
2.7
-50~200
596
300ml
Red
≥250
30
6
≥130
2.7
-50~320
598
300m l
Black
≥220
30
6
≥300
2.7
-50~210
5699
300ml
Grey
≥200
30
6
≥100
1.5
-50~210
5900
300ml
Black
≥200
30
6
≥550
1.3
-54~250
502 instant super glue
super glue
clear and liquid
Certificate ISO9001,MSDS and SGS
Widely used in metal and other materials
Widely used in metal and other materials, for example: steel, iron, copper, gold, silver, rubber, plastic, glass, ceramic, etc. Thus is a convenient adhesive for fixing and mending glass products, toys, PE products, metal board, electronic accents, stone, shells handicraft, wood handicrafts, bamboo handicrafts, etc.
Direction:
1.
Clean the surface of the objects to be glued thoroughly and keep it dry. Make sure the adhering parts bit up well.
2.
Drop a little glue onto one part, glued the other part together as soon as possible, and press them together a little while, then the glue will solidify instantly.
Storage:
Under cool and dry circumstance, room temperature between 15-20°C, use in unless th an 8 months storage period..
Technical information:
Color: transparent
Solidification: <=15s, <=20s after storage
Cutting strength: >=10Mpa
Specification:
1.
Alumina tube, 2g/ tube, 3g/ tube, 12 tubes/ cardboard
2.
Plastic bottle, 2.5g/ bottle, 5g/bottle, 8g/bottle,15g/bottle
3.
Big package: 20kg/ plastic pail
Caution:
1.
Strong adhesion to skin, don’t peel it directly if being glued, bathing within hot water for a while or wipe it off with acetone.
2.
Strong smell when volatilize
，
make sure to use it under wide and air-flowing circumstance when working with it for a long time.
3.
Seal the open end tightly to prevent volatilization.
4.
Storage under the required condition strictly, high temperature or wetness will shorten the storage period
.
clear and liquid
Certificate ISO9001,MSDS and SGS
Widely used in metal and other materials
Widely used in metal and other materials, for example: steel, iron, copper, gold, silver, rubber, plastic, glass, ceramic, etc. Thus is a convenient adhesive for fixing and mending glass products, toys, PE products, metal board, electronic accents, stone, shells handicraft, wood handicrafts, bamboo handicrafts, etc.
Direction:
1.
Clean the surface of the objects to be glued thoroughly and keep it dry. Make sure the adhering parts bit up well.
2.
Drop a little glue onto one part, glued the other part together as soon as possible, and press them together a little while, then the glue will solidify instantly.
Storage:
Under cool and dry circumstance, room temperature between 15-20°C, use in unless th an 8 months storage period..
Technical information:
Color: transparent
Solidification: <=15s, <=20s after storage
Cutting strength: >=10Mpa
Specification:
1.
Alumina tube, 2g/ tube, 3g/ tube, 12 tubes/ cardboard
2.
Plastic bottle, 2.5g/ bottle, 5g/bottle, 8g/bottle,15g/bottle
3.
Big package: 20kg/ plastic pail
Caution:
1.
Strong adhesion to skin, don’t peel it directly if being glued, bathing within hot water for a while or wipe it off with acetone.
2.
Strong smell when volatilize
，
make sure to use it under wide and air-flowing circumstance when working with it for a long time.
3.
Seal the open end tightly to prevent volatilization.
4.
Storage under the required condition strictly, high temperature or wetness will shorten the storage period
.