Super Adhesive

Super Adhesive is widely used in metal and other materials
Super Adhesive
Nature:
Widely used in metal and other materials, for example: steel, iron, copper, gold, silver, rubber, plastic, glass, ceramic, etc. Thus is a convenient adhesive for fixing and mending glass products, toys, PE products, metal board, electronic accents, stone, shells handicraft, wood handicrafts, bamboo handicrafts, etc.
Direction:
1.Clean the surface of the objects to be glued thoroughly and keep it dry. Make sure the adhering parts bit up well.
2.Drop a little glue onto one part, glued the other part together as soon as possible, and press them together a little while, then the glue will solidify instantly.
Storage:
Under cool and dry circumstance, room temperature between 15-20, use in unless than 8 months storage period..
Technical informat ion:
Color: transparent
Solidification: <=15s, <=20s after storage
Cutting strength: >=10Mpa
Specification:
1.Alumina tube, 2g/ tube, 3g/ tube, 12 tubes/ cardboard
2.Plastic bottle, 2.5g/ bottle, 5g/bottle, 8g/ bottle
3.Big package: 20kg/ plastic pail
Caution:
1.Strong adhesion to skin, dont peel it directly if being glued, bathing within hot water for a while or wipe it off with acetone.
2.Strong smell when volatilize,make sure to use it under wide and air-flowing circumstance when working with it for a long time.
3.Seal the open end tightly to prevent volatilization.
4.Storage under the required condition strictly, high temperature or wetness will shorten the storage period.

Not contain styrene and non-toxic Epoxy Resin Injective glue

1.Bicomponent modified epoxy resin injection anchor adhesive
2.Not contain styrene, non-toxic
3.Good thixotropy
1.
Product Characteristics
1) Modified epoxy resin, not contain styrene, safe and non-toxic
2) High strength, strong cohesion, good toughness, effect is equivalent to embedded.
3) Aging resistance, good heat-resistant performance, creep does not occur at room temperature.
4) Low moisture sensitivity, long-term load stability in a damp environment.
5) Acid-alkali resistance, good seismic resistance performance, no expansion.
6) Good thixotropy, especially suitable for anchoring the side or top.
7) Binocular straight mixed package, with special glue gun, not need prepare glue manually.

2.
Application
Range
1) The planting of steel bars and bolts in concrete’s frame member.
2) The fixation of drying hanging brackets of curtain walls and stone materials.
3) The reinforcement of building structures and the anchorage of framework.
4) The basic fixation of many equipments.
5) The anchoring connection of steel structures and concrete structures.
6) The engineering reinforcement of railways, public roads, bridges, water conservancy facilities’ reconstruction and extension, etc.
7) The fixation of advertisement boards, tunnel pipe lines, elevated road noise barriers and barricades.

.
Performance indexes

item
index
Colloidal performance
Splitting tensile strength (MPa)
Bending strength (MPa)
Compressive strength (MPa)
≥8.5
≥50
≥60
Adhesion performance
Steel-steel (steel sleeve) tensile anti-shear strength (MPa)
Under the constraint drawing condition, ribbed steel bars and C30, φ25, L=150mm (MPa)
Adhesion strength of concrete C60, φ25, L=125mm (MPa)
≥16
≥11

≥17
Non-volatile matter content (solid content) (%)
≥99.5
Construction technical indexes
rebar diameter(mmm)

10
12
14
16
18
20
22
25
28
30
drill hole diameter(mm)

14
18
20
22
25
28
30
32
35
37
tension desiger(KN)
depth 10d
19.5
27.7
36.2
50.1
61.5
81.1
98.2
125.2
155.3
190.8

depth 15d
24.2
33.1
46.9
61.8
77.7
96.5
116.8
149.3
187.5
236.1

Melamine powder 99.8%

Melamine powder 99.8%
1 .Commodity : Melamine
2 .Origin : China
3 .Specifications : Based on GB/T9567-1997
Purify 99.8% min
Moisture Content 0.1% max
PH Value: 7.5-9.5
Ash Content: 0.03% max
Chrome, Hazen 20 max
Turbility(China-Clay) 20 max
4.Packing : In 25kgs bag
5.Marking : Neutral English Marking
6. Quantity: 22 mt/ 20ft container
8. Lead time: within 2 weeeks after payment or L/C
9. Payment terms: 100% L/C at sight or T/T.

anti-hot contact adhesive

Our contact glue is very suitable for handling post figuration work ..

Our contact glue

APPLICATIONS
1. very perfect for fireproof board , main applies in he pretreatment steel board, density board, flakeboard, synthetic resin board when needing bending forming and bonding the surfaces.
2. Demand higher heat-resistance situation such as automotive, electronics industry.
CHARACTERISTICS:
1. good heat resistance ;high initial &late bonding strength ; high bonding strength.
2. be fit for spraying coating use on large area ,especially when handling post figuration work.
PARAMETERS
Main component
Chloroprene , modified resin
Appearance
Buff, viscosity solution
Main solvents
Toluene, petrolum
Viscosity CPS /25
About 150-500
Non-volatile
matter content %
About 20± 1.5
Softening point
150(1day)
Surface drying time
1-2minutes /25
Stickiness
5~20minutes /25
keeping life
12months

EVA Sealing Hot Melt Adhesive for manual box

Sealing Hot Melt Adhesive
1. It can be applied in low temp
2. Speed curing time
3. Improve output
4. Widely used
Sealing Hot Melt Adhesive
Descriptio
1. Hot Melt Adhesive stick
2. Application: Packaging, Beverage, Food, DIY/handicraft
3. It can be applied in low temp

Glue Stick Series Applications
Decorations, Toys/Handcrafts, Impact-absorbing materials, All kinds of packaging
Woodenware assembly, General assembly, DIY, Electronics industry UL-94V0.
SPECIFICATION
Product Code
Property Description
Industry Category
801K
Yellow glue stick with high viscosity for manual box sealing; It can be applied to coated paper and general glazed paper box sealing
PE, PP Film Coating Carton/Box Sealing
802B
Assembly, suitable for bonding Nylon cloth, PET cloth, PR film, PP film, and foam, etc .
DIY, Family, Assembly
805
Translucent white glue stick and granule for shoe industry, shoe parts bonding; also for general bonding, impact absorbing material, handcrafts, decorations, toys, ceramics, color boxes, etc.
DIY, Family, Assembly, Shoe Making
805AT
Translucent and white glue stick, granule which can be applied in low temperature for hair decorations, handcrafts, toys, ceramics, impact absorbing material and assembly
Assembly
805J
Good Adhesion to plastic, ceramic, metal, wood, and other materials; can be applied to EPE buffer Materials
Assembly
805WT
Glue stick for general purpose, good transparency. Good adhesion to plastic, ceramic, metal, wood, and other materials
Assembly
806A
Glue stick with high strength. Good adhesion to plastic, ceramic, wood, and other materials
Assembly
808B
Glue stick for general purpose, good transparency. Good adhesion to plastic, ceramic, wood, and other materials
DIY, Famil y, Assembly
810F
Standard type of box sealing adhesive, for general corrugated box packaging
Carton, box Sealing
812A
Glue stick for general purpose, good transparency. Good adhesion to plastic, ceramic, metal, wood, and other materials
Assembly
821A
Glue stick for general purpose, good transparency. Good adhesion to plastic, ceramic, metal, wood, and other materials
Assembly
863H1
Electronic industry, UL 94V-0 grade retardant glue stick
Electronics & Electrical Machinery
812K
glue stick for PP/PE bonding
Assembly, Car Industry
814W
Good bonding strength and heat resistance; contains halogen flame retardant; lower cost
Electronics & Electrical Machinery
818A
UL approved and comply with UL940V0 standard and RoHS regulations, mainly for fixing electric parts.
Electronics & Electrical Machinery

acetoxy silicone sealant

1 acetoxy silicone sealant
2 high strength
3.quick dry
4 good weather proof
5.Excellent adhesive ability

we are a professional silicone sealant manufacturer


Characteristics of product:
1. JS-607 acetoxy silicone glass sealant is clear rtv silicone sealant ,colored silicone sealant ,quick dry ,single component, acetic acid type It easily solidified at room temperature and convenient to use and has solidification rate.
2. Good weatger-agin resistance.
3. Good cementation ability for various building materials.

Major application:
1.Installtion of diversified doors and windows.
2. Cementation and sealing for glass decoration indoor.
3. Suitable for professional persons to use for general joint filling and sealing.

Standard:
GB/T 14683-2003

Prosper silicone sealant inclu de the following items
1 acid silicone sealant
2 neutral silicone sealant
3 silicone stone sealant
4 aquarium special silicone glass sealant
5 Large plate glass special silicone sealant
6 Structural silicone sealant

two components polysulfide sealant

1.5.5per plastic bucket
2.Reasonable curing rate;
3.High strength;
4.Long shelf life;
CY208 two-component structural silicone sealant
Features:
1.CY208 two-component silicone sealant specifically designed for the structural assembly in the high modulus, neutral, high-performance fixed construction sealant, it has excellent resistance to ozone, UV radiation release, resistance to extreme temperatures ( -40 ~ 150 °C) to most building materials have good adhesive properties.
2. For most glass and coated glass has excellent adhesive nodal.
3. Neutral fixed, non-corrosive to most buildings.
4. Fixed after the formation of silicone rubber body, with excellent weather resistance and aging.
5.A component and B component / curing agent supporting batch no restrictions.
6. Conservation period is short and mech anical sizing, is conducive to the construction process.
Basic purposes:
CY208 silicone sealant designed in structural applications:
1, the structure of the glass curtain wall.
2, glass and metal bonding between the materials.
3, and other construction and industrial adhesive seal.
Instructions for use:
1, prior to use adhesive material compatibility testing, to be constructed after the confirmation of qualified products.
2, silicone sealant curing agent stir before use to avoid the first place that may arise during the deposition phenomenon. As curing agent and exposure to moisture in the atmosphere would have reflected, not prolonged exposure to air.
3, CY208 mixture of silicone sealant base and curing agent weight ratio of 12.5:1 (volume ratio 9.5:1) Users can change the total mixing ratio of 10:1 ~ 16:1 (volume ratio 7: 1 ~ 11:1) regulating coagulation time. Within this context, a mixture of sealant, its original character will not cha nge significantly.
4, in high temperature environment, the substrate surface temperature exceeds 40 °C, not construction.
Restrictions on Use:
1, does not apply to all the leaking oil, plasticizers, solvents, or frost, wet surface.
2, the test and all building materials have good adhesion and compatibility.
3, not for long-term flooding or damp places throughout the year.
4, B-component with the air react with water vapor, not long-term exposure to air.
Standard:
GB16776-2005 standard
Typical technical parameters:
The following data are for reference only, not recommended norm
Item Specification
1 sag sag placed mm 3
The same type of horizontal
2 out of s 10
Application of the Min 20 3
4, dry time, min (temperature 25 °C, relative humidity 50%) 30 ~ 60
5 Shaw temperature 30 ~ 60
6 Tensile properties of tensile bond strength adhesive standard conditions 0.6 mpa
90 °C 0.45
-30 °C0 .45
0.45 after flooding
Water - UV light after 0.45
5% bond failure area
23 °C, the maximum tensile strength of 100% elongation
TGA 7 thermal aging10
No cracking
Powder free
Safety:
1, no fixed structure, the structure of plastic and will be fixed during the release of volatile compounds, long-term inhalation of high concentrations of volatile compounds detrimental to health, therefore, should pay attention to maintain good workplace ventilation.
2, the structure is not fixed for too long direct contact with skin glue, if accidentally into eyes, rinse immediately with plenty of water, if necessary, and then ask the doctor to check.
3, the structural adhesive will not be fixed after the release of hazardous substances, nor will the role of skin damage.
4, such as the swallow, adhesive, should immediately seek medical attention.
Color and Packaging:
CY208 A component structural silicone sealant / base mixture of whit e paste, the use of standard 190L iron drum; B component / curing agent for the easy flow of black liquid, the use of 20L standard iron or plastic drum.
Storage period:
Please store in the temperature cool and dry place below 27 °C, the effective period of 12 months.